DESCRIPTION
Hot oilers are used to remove water and paraffin from oil which can plug tubing, flow lines, and production tools under low temperatures. In situations where produced salt is so prolific that the flow lines are gummed, our hot oilers can heat water to dissolve the salt and bring the well back to production. Key’s trucks can also be used for heating water or oil for frac jobs, jetting out solids in reverse unit tanks, oil storage tanks and open lined pits.
SPECIFICATIONS
Deck engine:
Cummins ISX-450 (335 kW @ 2,000 RPM)
Transmission:
Fuller RTLO16913A 13-speed
Pump:
Triplex Plunger Pump 600 (3.5″ Plunger)
Max. working pressure:
70 MPa
Boosting centrifugal pump :
3×2
Fluid supply pump:
Bowie Pump 3″
Heater:
JB2 oil fired burner
Heating capacity:
2342 kWh
Fuel:
Diesel Oil
Max. heating temperature:
120 °C
Fluid storage tank capacity:
10 m³
Gallery
RELATED PRODUCTS
Coiled Tubing Services
Used for production, clean out jobs and ‘plugging and abandonment’, our spread equipment delivers quality and reliability every time. Ideally suited for a range of
Well Service Rigs
Key’s extensive fleet of rigs includes a wide range of classes, up to 1000+ HP for well servicing and drilling. Each rig is available with
Well Service Rigs – AESC Class I / II
Key’s extensive fleet of rigs includes a wide range of classes, up to 1000+ HP for well servicing and drilling. Each rig is available with
Well Service Rig – AESC Class III
Key’s extensive fleet of rigs includes a wide range of classes, up to 1000+ HP for well servicing and drilling. Each rig is available with
Well Service Rig – AESC Class IV
Key’s extensive fleet of rigs includes a wide range of classes, up to 1000+ HP for well servicing and drilling. Each rig is available with
Well Service Rig – AESC Class V
Key’s extensive fleet of rigs includes a wide range of classes, up to 1000+ HP for well servicing and drilling. Each rig is available with
Well Service Rig – AESC Class VI
Key’s extensive fleet of rigs includes a wide range of classes, up to 1000+ HP for well servicing and drilling. Each rig is available with
Pumpdown Services
Pump and pumpdown tools on longer lateral wells. Skid- or trailer-mounted units to suit your needs.
Jars
Johnston Fishing Jars (hydraulic jars) deliver impact at any hydrostatic pressure and they hit quick, hard and long – even at bottom-hole temperatures up to
Slips
Slips are used in the process of tripping pipe.
Elevators
A clasp used to lift tubulars in and out of the well bore. Rod elevators are used to handle rods and tubulars, and come come
Pipe Handlers
Pipe handling devices minimize human interaction to handle and move pipe. They lower the overall cost of well site interventions by increasing pipe-handling efficiency through
Whipstocks
Whether re-entering an existing wellbore or sidetracking around a stuck bottom hole assembly, our equipment and services have proven to reduce trips, milling time and
Fishing Services
Fishing Services are used to remove wellbore obstructions. Key is highly capable of providing Fishing services for cased and open-hole applications. Our tool fleet ranges
Power Swivel
Power Swivels are used for drill outs, clean outs, rotating tubulars, and downhole tool orientation. Our fleet includes the S-85 (NOV Bowen), S-120
Smart Tongs
The SmartTong® system takes the guesswork out of rod connections. As the world’s first computer-controlled connection service, algorithms ensure correct circumferential displacement on every connection
Tongs
Tongs are used for breaking and making-up tubing connections. Tubing/rod tongs are hydraulic wrenches used to turn and torque pipe and rods, open-face and close-face
Blowout Preventer Packages
Blowout Preventers (BOPs) are a critical piece of safety equipment, as they protect rig crews, the rig, and the wellbore. Key maintains an inventory of
Tubulars
Key has the largest fleet of high quality ‘tubulars’, manufactured to industry-leading specifications. Tubulars are crucial components for drilling, completion and production programs, and we
Foam Air Units
Our safe and efficient Foam Air equipment provides a fast and economic well cleanout solution. Using a Lufkin or Great Dane 45’ x 102” drop-deck
Reverse Units
These are packages that include pumps, power swivels, and tanks used to circulate fluid in and out of the well bore. Key’s certified
Fresh & Brine H2O
We have four permitted fresh and brine water facilities throughout the Permian Basin, each being able to provide more than 1,500 BPD.
Acid & Acid Treatments
Our treatments see acid pumped into the well and into the pores of the reservoir rocks. In this form of acidization, the acids
Disposal Wells
Saltwater disposal wells allow us to handle produced fluids responsibly and efficiently. Key operates more than 50 disposal injection wells, where produced water is run
Winch Trucks
For tow and recovery requirements, these trucks are an everyday essential. Their flexibility and usefulness makes them an indispensable asset for our fleet.
Pump/Kill Truck
Our pump/kill trucks are used for well pressure control. Uses include testing casing, pressure testing tubing and flow lines, to support well stimulation, and in
SandX Unit
Sand-X® Sand Management System is a custom-engineered frac tank retrofitted with a special auger to separate sand from the fluid return automatically, in a safe,
Vacuum Trucks
Key’s vacuum trucks transport non-hazardous fluid or waste to or from your well operation. The materials commonly carried include fresh water, field salt water, 10
Frac Tanks
Frac fluid support is critical to keeping your hydraulic stimulation jobs running. Key have one of the largest fleets of frac tanks in the industry,
2.625” Coiled Tubing Spread
Used for completions, clean out jobs and ‘plugging and abandonment’, our spread equipment delivers quality and reliability every time. Ideally suited for a
2.375” Coiled Tubing Spread
Used for completions, clean out jobs and ‘plugging and abandonment’, our spread equipment delivers quality and reliability every time. Ideally suited for a
2” Coiled Tubing Spread
Used for production, completions, clean out jobs and ‘plugging and abandonment’, our spread equipment delivers quality and reliability every time. Ideally suited for
1.75” Coiled Tubing Spread
Used for production, clean out jobs and ‘plugging and abandonment’, our spread equipment delivers quality and reliability every time. Ideally suited for a
1.5” Coiled Tubing Spread
Used for production, clean out jobs and ‘plugging and abandonment’, our spread equipment delivers quality and reliability every time. Ideally suited for a
1.25” Coiled Tubing Spread
Used for production, clean out jobs and ‘plugging and abandonment’, our spread equipment delivers quality and reliability every time. Ideally suited for a range of
Nitrogen Services
Our trailer-mounted Nitrogen Production Unit (NPU) can deliver this essential resource to your drilling operation wherever you are based. Using a Lufkin or Great Dane